6 Reasons Why is the Waterpik Not Charging?

6 Reasons Why is the Waterpik Not Charging?

We have listed the six major reasons why your Waterpik setup is not charging. We also try to solve the issue of not charging Waterpik and how you can easily fix the issue.

1. Check the Condition of the Cable 

Waterpik not charging might be caused by various factors, but the cord is one of the first things to check.

If you had Waterpik for a long time, there is a chance that a defective cable is a cause. As one of the most untidy ways of managing things is cables. We frequently step or trip on them, they become twisted up, we carelessly throw them in bags, and so on.

Look for your charging cord to see if there are any apparent indications of damage. Any tears, twists, cuts, or general damage will be a reason for the wires not working correctly. Also, test if you can charge another gadget with it.

If the cable works with another device, the issue will not be the cable; the problem might lie with your device. You can try charging your Waterpik flosser with another cable and check whether it works. Buy a new cable on Amazon.

2. Thoroughly Check the Charging port 

If your cord and charger function with other devices, it’s time to turn your attention to your Waterpik.

The charging port is another common cause. First, go ahead and inspect the port for any dirt or debris. A dirty port, for example, will cause your charging to fail. You might try using a brush or compressed air to clean it. 

Have you noticed that the port is a little slack lately? Excessive use of ports might cause them to wear out, and there may also be symptoms of rusting in there. Unfortunately, there isn’t much you can do about it except replace the Waterpik or try to get the port changed. 

3. Check the Adapter 

Waterpik Check the Adapter

For sure, the cable is just as crucial as the wall charger. Go ahead and put it to the test. Examine it for evident damage. Cracks or twisted outlets are clear warning signs. Similarly, test it with different devices and replace it with another adapter to check if this is the issue.

If the adapter is not working with any wall outlet, the problem indeed lies with the adapter. This could be the reason behind your Waterpik not working.

Now, you could call up your company who sold you the Waterpik and purchase an adapter or get it replaced if it is still in warranty. Buy a Waterpik Adaptor at Amazon.

4. Check for Water and Moisture 

If there is a presence of moisture in the charging port. Leave the Waterpik to dry in the open sunlight and air. 

Most of the vapors will evaporate after a few hours. You can also try using a hair drier. If you’re sure the charging port is dry, try turning your device off and on again. If still, the charger is not working, it is time to purchase a new Waterpik. 

5. Try Changing Batteries 

For this, you have to open the Waterpik flosser. Then you have to dismantle it. Desolder the old battery. Solder in the replacement battery. Reassemble the Waterpik flosser and then recharge the new battery. 

6. Try a Different Power Source

Try plugging some other objects into the same socket where you’re attempting to charge your phone and check if it works.

Sometimes plugs fail, or an area of your home may have electrical issues. Furthermore, certain power outlets might be insufficient. If your power outlet isn’t working correctly for any device, try another one in the house.

If nothing is charging from your power outlet, the problem is with the power outlet. With this, we have listed the six major reasons why Waterpik not charging.

Read More:

How to Build Pc in 30 seconds x
How to Build Pc in 30 seconds

Similar Posts